Ip Commands; Ip Configuration Parameters; Syntax Examples - Avaya AP-7 User Manual

IP Commands

IP Configuration Parameters

Table 77: IP Configuration Parameters
Name
Network
IP Configuration
IP Address
IP Mask
Default Router
IP Address
Default TTL
Address Type
Note:
The IP Address Assignment Type (ipaddrtype) must be set to static before the IP
Note:
Address (ipaddr), IP Mask (ipmask) or Default Gateway IP Address (ipgw) values
can be entered.
Note:
The IP Subnet Mask of the AP must match your network's Subnet Mask.
Note:

Syntax Examples

[Device-Name]> set ipaddrtype static
[Device-Name]> set ipaddr <fixed IP address of unit>
Type Values
Group N/A
Group N/A
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
Integer User Defined
(seconds)
0-255,
64 (default)
Integer static
dynamic (default)
Access CLI Parameter
R network
R ip (Note: The network and
ip parameters display the
same information)
RW ipaddr
RW ipmask
RW ipgw
RW ipttl
RW ipaddrtype
Issue 1 September 2004
IP Commands
245