Table of Contents
Advertisement
Syntax Examples
Change SNMP Passwords
[Device-Name]> set snmprpasswd <New Password> (SNMP read password)
[Device-Name]> set snmprwpasswd <New Password> (SNMP read/write)
[Device-Name]> set snmpv3authpasswd <New Password> (SNMPv3 authentication
password)
[Device-Name]> set snmpv3privpasswd <New Password> (SNMPv3 privacy password)
Configure Management Interfaces
[Device-Name]> set snmpifbitmask <(see
Choose from the following values:
Table 92: Interface Bitmask Values
Interface Bitmask
0 or 2 = disable (all interfaces)
1 or 3 = Ethernet only
4 or 6 = Wireless only
5 or 7 = all interfaces
Table
92)>
Description
All management channels disabled
Ethernet only enabled
Wireless only enabled
All management channels enabled
Issue 1 September 2004
SNMP Commands
265
Advertisement
Table of Contents
