Syslog Host Table - Avaya AP-7 User Manual

The Command Line Interface
Table 99: Syslog Parameters
Name
Syslog Lowest Priority
Logged
Heartbeat Status
Heartbeat Interval
(seconds)
Note:
When Heartbeat is enabled, the AP periodically sends a message to the Syslog
Note:
server to indicate that it is active. The frequency with which the heartbeat
message is sent depends upon the setting of the Heartbeat Interval.

Syslog Host Table

The table described below configures the Syslog hosts that will receive message from the AP.
You can configure up to ten Syslog hosts.
Table 100: Syslog Host Table
Name
Syslog Host Table
Table Index
IP Address
Comment (optional)
Status (optional)
270 Avaya Wireless AP-7 User Guide
Type Values
Integer 1 – 7
1 = LOG_ALERT
2 = LOG_CRIT
3 = LOG_ERR
4 = LOG_WARNING
5 = LOG_NOTICE
6 = LOG_INFO (default)
7 = LOG_DEBUG
Integer enable (1)
disable (2) (default)
Integer 1 – 604800 seconds;
900 sec. (default)
Type Values
Table N/A
Integer 1 – 10
IpAddress User Defined
DisplayString User Defined
Integer enable
disable
delete
Access CLI Parameter
RW syslogpritolog
RW sysloghbstatus
RW sysloghbinterval
Access CLI Parameter
R sysloghosttbl
N/A index
RW ipaddr
RW cmt
RW status
2 of 2