Table of Contents
Advertisement
Figure 19: Network Configuration — DHCP Server Subtab
Table 6: DHCP Server Parameters
Parameter
Enable DHCP Server
Subnet Mask
Gateway IP Address
Primary DNS IP Address
Description
Place a check mark in the box provided to enable DHCP Server
functionality.
Note:
You cannot enable the DHCP Server
Note:
functionality unless there is at least one IP Pool
Table Entry configured.
This field is read-only and reports the Access Point's current
subnet mask. DHCP clients that receive dynamic addresses
from the AP will be assigned this same subnet mask.
The AP will assign the specified address to its DHCP clients.
The AP will assign the specified address to its DHCP clients.
Network Configuration
Issue 1 September 2004
1 of 2
57
Advertisement
Table of Contents
