Table of Contents
Advertisement
The Command Line Interface
Syntax Examples
Enable VLAN Management
[Device-Name]> set vlanstatus enable
[Device-Name]> set vlanmgmtid <1-4094>
[Device-Name]> show wifssidtbl (to review your settings)
[Device-Name]> reboot 0
Disable VLAN Management
[Device-Name]> set vlanstatus disable or 2
[Device-Name]> set vlanmgmtid 0
[Device-Name]> reboot 0
WME/QoS Commands
The Wireless Multimedia Enhancements (WME) commands enable and configure Wireless
Multimedia Enhancement (WME)/Quality of Service (QoS) parameters per wireless interface.
Enable or Disable QoS
The following two commands are part of the Wireless Interface Properties table.
Table 113: Enable/Disable Qos Parameters
Name
QoS Status
QoS Maximum
Medium Threshold
292 Avaya Wireless AP-7 User Guide
Type
Values
Object
enable
Status
disable
(default)
Integer
50 - 90
Access
CLI Parameter
RW
qosstatus
RW
qosmaximummediumthreshold
Advertisement
Table of Contents
