Syntax Examples - Avaya AP-7 User Manual

The Command Line Interface
Table 102: Telnet Parameters
Name
Telnet Port
Telnet Login Inactivity
Time-out
Telnet Session Idle
Time-out

Syntax Examples

Configure Management Interfaces
[Device-Name]> set telifbitmask <(see
Choose from the following values:
Table 103: Interface Bitmask Values
Interface Bitmask
0 or 2 = disable (all interfaces)
1 or 3 = Ethernet only
4 or 6 = Wireless only
5 or 7 = all interfaces
Set TCP Port
[Device-Name]> set telport <Telnet port number (default is 23)>
Set Telnet Session Timeouts
[Device-Name]> set tellogintout <time in seconds between 1 and 300> (default is 30)
[Device-Name]> set telsessiontout <time in seconds between 1 and 36000> (default is
900)
274 Avaya Wireless AP-7 User Guide
Type Values
Integer User Defined
23 (default)
Integer 1 – 300 seconds
30 sec (default)
Integer 1 - 900 seconds
900 sec (default)
Table 103)>
Description
All management channels disabled
Ethernet only enabled
Wireless only enabled
All management channels enabled
Access CLI Parameter
RW telport
RW tellogintout
RW telsessiontout
2 of 2