Table of Contents
Advertisement
TX Power Control
[Device-Name]> set wif <interface number> currenttxpowerlevel <value>
Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)
For more information on the TX Power Control feature, see
page 276.
Enable/Disable Closed System
[Device-Name]> set wif <index> closedsys <enable/disable>
Shutdown/Resume Wireless Service
[Device-Name]> set wif <index> wssstatus <1 (resume)/2 (shutdown)>
Set the Multicast Rate (802.11a)
[Device-Name]> set wif 3 multrate <6, 9, 12, 18, 24, 36, 48, or 54 (Mbits/sec)>
Enable/Disable Super Mode (802.11a/g only)
[Device-Name]> set wif 3 super <enable/disable>
Enable/Disable Turbo Mode (802.11a/g only)
[Device-Name]> set wif 3 turbo <enable/disable>
Note:
Super mode must be enabled on the interface before Turbo mode can be
Note:
enabled.
802.11a Wireless Interface Commands
TX Power Control Commands
Issue 1 September 2004
on
281
Advertisement
Table of Contents
