Table of Contents
Advertisement
Getting Started
j. Click Cancel to close the ScanTool.
k. Proceed to
interface.
Setup Wizard
The first time you connect to an AP's HTTP interface, the Setup Wizard launches automatically.
The Setup Wizard provides step-by-step instructions for how to configure the Access Point's
basic operating parameter, such as Network Name, IP parameters, system parameters, and
management passwords.
Setup Wizard Instructions
Follow these steps to access the Access Point's HTTP interface and launch the Setup Wizard:
1. Open a Web browser on a network computer.
The HTTP interface supports the following Web browser:
- Microsoft Internet Explorer 6 with Service Pack 1 or later
- Netscape 6.1 or later
2. If necessary, disable the browser's Internet proxy settings. For Internet Explorer users,
follow these steps:
a. Select Tools > Internet Options....
b. Click the Connections tab.
c. Click LAN Settings....
d. If necessary, clear the Use a proxy server box.
e. Click OK twice to save your changes and return to Internet Explorer.
3. Enter the Access Point's IP address in the browser's Address field and press Enter.
This is either the dynamic IP address assigned by a network DHCP server or the static IP
address you manually configured. See
determine the unit's IP address and manually configure a new IP address, if necessary.
Result: The Enter Network Password screen appears. See
32 Avaya Wireless AP-7 User Guide
Setup Wizard
on page 32 for information on how to access the HTTP
ScanTool
on page 28 for information on how to
Figure
10.
Advertisement
Table of Contents
