Avaya AP-7 User Manual page 118

Performing Advanced Configuration
RogueScan Data Collection
The AP stores information gathered about detected stations during scanning in a Rogue Scan
result table. The Rogue Scan result table can store a maximum of 2000 entries. When the table
fills, the oldest entry is overwritten. The Rogue Scan result table lists the following information
about each detected station:
Station Type: indicates one of the following types of station:
•
- Unknown station
- AP station
- Infrastructure Client Station
- IBSS Client Station
MAC Address of the detected station
•
Channel: the working channel of the detected station
•
SNR: the SNR value of the last frame from the station as received by the AP
•
BSSID: the BSSID field stores the:
•
- MAC address of the associated Access Point in the case of a client.
- Zero MAC address or MAC address of the partner Access Point if the AP is a partner of a
WDS link
The AP ages out older entries in the Rogue Scan result table if a detected station is inactive for
more than the Scan Result Table Ageing Time.
Rogue Scan Subtab
Use the Rogue Scan subtab to configure the Rogue Scan feature and the scan interval.
Figure 41 shows the Rogue Scan subtab. This screen also displays the number of new access
points and clients detected in the last scan on each wireless interface.
114 Avaya Wireless AP-7 User Guide