Table of Contents
Advertisement
Chapter 3: Viewing Status Information
Chapter Contents
This chapter contains the following sections:
Logging into the HTTP Interface
•
System Status
•
Logging into the HTTP Interface
Once the AP has a valid IP Address and an Ethernet connection, you may use your web
browser to monitor the system status.
Follow these steps to monitor an AP's operating statistics using the HTTP interface:
1. Open a Web browser on a network computer.
Note:
The HTTP interface supports the following Web browser:
Note:
- Microsoft Internet Explorer 6 with Service Pack 1 or later
- Netscape 6.1 or later
2. If necessary, disable the Internet proxy settings. For Internet Explorer users, follow these
steps:
a. Select Tools > Internet Options....
b. Click the Connections tab.
c. Click LAN Settings....
d. If necessary, clear the Use a proxy server check box.
e. Click OK twice to save your changes and return to Internet Explorer.
3. Enter the Access Point's IP address in the browser's Address field and press Enter.
Note:
The default IP address of the AP is 169.254.128.132.
Note:
Result: The Enter Network Password screen appears. See
on page 43
on page 45
Figure
13.
Issue 1 September 2004
43
Advertisement
Table of Contents
