The Command Line Interface
RADIUS-Based Management Access Commands
The RADIUS Based Management Access parameters allow you to enable HTTP or Telnet
Radius Management Access, enable or disable local user access, and configure the local user
password.
The default local user ID is root and the default local user password is public. "Root" cannot be
configured as a valid user for RADIUS based management access when local user access is
enabled.
Table 86: RADIUS-Based Management Access Parameters
Name
Radius Local User
Status
Radius Local User
Password
HTTP Radius
Management Access
Telnet Radius
Management Access
Secure Management Commands
Secure Management Parameters
Table 87: Secure Management Parameters
Name
Secure Management
258 Avaya Wireless AP-7 User Guide
Type
Values
Integer
Enable
Disable
DisplayString
User Defined
Integer
Enable
Disable
Integer
Enable
Disable
Type
Values
Integer
Enable/Disable
Access
CLI Parameter
RW
radlocaluserstatus
RW
radlocaluserpasswd
RW
httpradiusmgmtaccess
RW
telradiusmgmtaccess
Access
CLI Parameter
RW
securemgmtstatus