Checkout Gas Chromatograms; Introduction - Inficon Micro GC Fusion 2-Module Operating Manual

INFICON

14 Checkout Gas Chromatograms

14.1 Introduction

074-594-P1H Micro GC Fusion Operating Manual
Standard checkout gases are used in the factory to validate the chromatography
performance of Micro GC Fusion. Chromatograms created with these checkout gases
on Micro GC Fusion columns are provided in this chapter to demonstrate typical peak
elution order, when these checkout gases are used at the customer site during
product acceptance.
Actual retention times and area counts will vary from column to column.
The following column types are included in this chapter:
• Rt-Msieve 5A, see 10 m Rt-Msieve 5A [} 312]
• Rt-Q-Bond, see 12 m Rt-Q-Bond [} 314]
• Rxi-1ms, see 10 m Rxi-1ms [} 316]
For a complete list of checkout gases and the corresponding concentrations, see
Checkout Gases [} 301].
Checkout Gas Chromatograms | 14
311 / 319