Inficon Micro GC Fusion 2-Module Operating Manual page 262

10 | Routine Operation
262 / 319
11
Remove the retaining screws:
ð For modules C/D, remove the retaining screw holding the JP-100 in place
with the 2.5 mm ball point hex driver.
ð For modules A/B, remove the retaining screw holding the JP-100 in place with
the 2.5 mm ball point hex wrench.
12
Slide the JP-100 up and out of the instrument.
13 See GC Module Removal Procedure for 4-Module System [} 273] to continue
the module removal process.
074-594-P1H Micro GC Fusion Operating Man-
INFICON
ual