Run A Loaded Method Or Sequence - Inficon Micro GC Fusion 2-Module Operating Manual

8 | Front Panel Operation

8.4 Run a Loaded Method or Sequence

152 / 319
Perform the following steps to run a loaded method or sequence from the
Micro GC Fusion front panel display:
1
Ensure the desired method or sequence is loaded. If not, load the desired
method or sequence by following the steps in Select and Load a Method or
Sequence [} 151].
2
Tap the green RUN button to begin a sample run.
3
The RUN button displays Running and the process of the run is indicated by the
movement of the blue band on the circumference of the button.
4
Once the run is completed and the starting method conditions are met, the green
RUN button reappears.
074-594-P1H Micro GC Fusion Operating Man-
INFICON
ual