6 | Installation
6.7.2 Set Up the Static IP Address
Start IP Address End IP Address
10.0.0.0
10.255.255.255
172.16.0.0
172.31.255.255
192.168.0.0
192.168.255.255 16-bit block, 192.168/16 prefix, 256 contiguous class C network numbers
86 / 319
CAUTION
If Micro GC Fusion will be connected to a local area network, check with the
network administrator prior to changing to static IP address to avoid conflicts.
The wireless Ethernet port on Micro GC Fusion uses IP address 10.10.0.1. Do
not use this static IP address.
Three blocks of IP address spaces are reserved by the Internet Assigned Numbers
Authority (IANA) for private internets. INFICON recommends using these IP
addresses for setting up a static IP address on Micro GC Fusion.
Remarks
24-bit block, 10/8 prefix, one class A
20-bit block, 172.16/12 prefix, 16 contiguous class B
1
Click the
icon.
2
Click System Administration.
074-594-P1H Micro GC Fusion Operating Man-
INFICON
ual
Need help?
Do you have a question about the Micro GC Fusion 2-Module and is the answer not in the manual?