Inficon Micro GC Fusion 2-Module Operating Manual page 225

INFICON
074-594-P1H Micro GC Fusion Operating Manual
14
Click the icon to save the calibration to the method. A window will prompt the
user to save the calibration. To override the current method, use the original
method name. An
15
Click the icon.
16
A message will prompt the user to reload the method and apply the calibration.
17
To reprocess the calibrated run with the new information, click the
confirmation message will display Are you sure you want to reprocess the X
selected run(s)? Click the
calibration to prior runs, select the desired runs from the list before clicking the
icon.
18
A confirmation message will display.
19
Click the icon to exit the calibration window.
20
The method is now calibrated for two levels. Click the
main page.
21
Click the updated method preset to reload the method.
22
For more than two calibration levels, repeat steps 2 through 21 as necessary.
icon will indicate that there are unsaved changes.
icon to reprocess the run. To apply the new
Software Operation | 9
icon. A
icon to return to the
225 / 319