Inficon Micro GC Fusion 2-Module Operating Manual page 202

9 | Software Operation
202 / 319
7
Click on any of the Parameter shortcut menus to select an integration parameter.
For additional information on integration events, please see the relevant section:
ð Baseline Window . . . . . . . . . . .See Baseline Window [} 203]
ð Group Peaks . . . . . . . . . . . . . .See Group Peaks [} 204]
ð Manual Integration . . . . . . . . . See Manual Integration [} 205]
ð Min Height Threshold. . . . . . . .See Min Height Threshold [} 206]
ð No Peaks . . . . . . . . . . . . . . . . .See No Peaks [} 207]
ð Start Sensitivity . . . . . . . . . . . . See Start Sensitivity [} 208]
ð Stop Sensitivity. . . . . . . . . . . . .See Stop Sensitivity [} 209]
ð Peak Sensitivity . . . . . . . . . . . .See Peak Sensitivity [} 210]
ð Forced Baseline . . . . . . . . . . . .See Forced Baseline [} 211]
ð Negative Peaks . . . . . . . . . . . . See Negative Peaks [} 212]
ð Integration changes are applied to the chromatogram automatically, but are
not automatically saved.
8 Click the icon to delete an integration parameter.
9 Click the icon to save the changes to the method, or click the Compounds tab
to proceed to compound calibration.
074-594-P1H Micro GC Fusion Operating Man-
INFICON
ual