3Com 8800 Configuration Manual page 642

3Com Switch 8800 Configuration Guide
43.1.2 Directory Operation
The file system can be used to create or delete a directory, display the current working
directory, and display the information about the files or directories under a specified
directory. You can use the following commands to perform directory operations.
Perform the following configuration in user view.
Table 43-1 Directory operation
Create a directory
Delete a directory
Display the current working directory
Display the information about directories or files
Change the current directory
43.1.3 File Operation
The file system can be used to delete or undelete a file and permanently delete a file.
Also, it can be used to display file contents, rename, copy and move a file and display
the information about a specified file. You can use the following commands to perform
file operations.
Perform the following configuration in user view.
Table 43-2 File operation
Delete a file
Undelete a file
Delete a file from the recycle bin permanently
View contents of a file
Rename a file
Copy a file
Move a file
Display the information about directories or
files
Execute the specified batch file (system view)
Operation
Operation
43-2
Chapter 43 File System Management
Command
mkdir directory
rmdir directory
pwd
dir [ / all ] [ file-url ]
cd directory
Command
delete [ /unreserved ] file-url
undelete file-url
reset recycle-bin [ file-url ]
more file-url
rename fileurl-source fileurl-dest
copy fileurl-source fileurl-dest
move fileurl-source fileurl-dest
dir [ / all ] [ file-url ]
execute filename