Displaying Vlan - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
Note:
The port to be associated with a protocol-based VLAN must be of Hybrid type and in
this VLAN.
The same protocol can be configured in the different VLANs, but cannot be
configured repeatedly in the same VLAN.
A port cannot be associated with different VLANs with the same protocols
configured.
You cannot delete a protocol-based VLAN that has ports associated with.
You cannot delete a protocol-based VLAN on a port while the port is associated with
the VLAN.

8.5 Displaying VLAN

After the above configuration, execute the display command in any view to display the
running of the VLAN configuration, and to verify the configuration.
Table 8-8 Display VLAN
Display the related information about the
VLAN interface
Display the related information about the
VLAN
Display the protocol information and
protocol
specified VLAN
Display the protocol information and
protocol
specified port
Operation
index configured on
index configured on
display interface
[ vlan_id ]
display vlan[ vlan_id to vlan_id | all |
static | dynamic ]
display vlan-protocol vlan { vlan_list |
the
all }
display vlan-protocol
the
{ interface_list | all }
8-5
Chapter 8 VLAN Configuration
Command
vlan-interface
interface