3Com 8800 Configuration Manual page 242

3Com Switch 8800 Configuration Guide
Configure the egress route policy for a
peer group
Remove the egress route policy of a
peer group
II. Configuring route filtering policy based on IP ACL for a peer (group)
Table 21-19 Configure route filtering policy based on IP ACL for a peer (group)
Configure the ingress route filtering policy
based on IP ACL for a peer (group)
Remove the ingress route filtering policy
based on IP ACL of a peer (group)
Configure the egress route filtering policy
based on IP ACL for a peer (group)
Remove the egress route filtering policy
based on IP ACL for a peer (group)
III. Configuring route filtering policy based on AS path list for a peer (group)
Table 21-20 Configure route filtering policy based on AS path list for a peer (group)
Configure the ingress route filtering policy
based on AS path list for a peer (group)
Remove the ingress route filtering policy
based on AS path list of a peer (group)
Configure the egress route filtering policy
based on IP ACL for a peer group
Remove the egress route filtering policy
based on IP ACL for a peer group
The acl-number argument indicates AS path list number, which you can use the acl
command instead of the ip as-path-acl command to configure. For the detailed
configuration, refer to Chapter 22 "IP Routing Policy Configuration".
Operation
Operation
Operation
21-13
Chapter 21 BGP Configuration
Command
peer group-name
route-policy-name export
undo peer group-name route-policy
route-policy-name export
Command
peer { peer-address | group-name }
filter-policy acl-number import
undo peer {
group-name } filter-policy acl-number
import
peer group-name
acl-number export
undo peer group-name filter-policy
acl-number export
Command
peer { peer-address | group-name }
as-path-acl acl-number import
undo peer {
group-name } as-path-acl acl-number
import
peer group-name
acl-number export
undo peer group-name as-path-acl
acl-number export
route-policy
peer-address |
filter-policy
peer-address |
as-path-acl