3Com 8800 Configuration Manual page 749

3Com Switch 8800 Configuration Guide
X. Exiting the public key edit view
Use this configuration task to return from the public key edit view to the public key view
and save the input public key. Before saving the input public key, the system will check
the validity of the key:
If the public key string contains any illegal character, the configured key is invalid;
If the configured key is valid, it will be saved to the public key list.
Perform the following configuration in public key edit view.
Table 50-11 Exit the public key edit view
Exit the public key edit view
XI. Specifying the public key for an SSH user
Use this configuration task to specify an existing public key for an SSH user.
Perform the following configuration in system view.
Table 50-12 Specify the public key for an SSH user
Specify the public key for an SSH user
Cancel the corresponding relationship
between the user and the public key
XII. Configuring the server compatibility mode
Use this configuration task to set whether the server should be compatible with the SSH
1.x client.
Perform the following configuration in system view.
Table 50-13 Configure the compatibility mode
Set the server to be compatible with the
SSH 1.x client
Set the server to be incompatible with
the SSH 1.x client
By default, the server is compatible with the SSH 1.x client.
Operation
Operation
Operation
50-11
Chapter 50 SSH Terminal Service
Command
public-key-code end
Command
ssh user username assign rsa-key
keyname
undo ssh user username assign
rsa-key
Command
ssh server compatible_ssh1x enable
undo ssh server compatible_ssh1x