Enabling Msdp - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
case when the message is from Switch E to Switch F, it is received and forwarded
to other peers.
6) If the SA message is sent from a MSDP peer in a different domain which is the
next autonomous domain along the optimal path to the RP in the domain of source,
as from Switch D to Switch F, it is received and forwarded to other peers.
7) For other SA messages, they are neither received nor forwarded.
III. Precautions for configuration
The router operating MSDP must also run BGP or MBGP. It is recommended to use the
same IP address of the MSDP peer with that of the BGP peer or MBGP peer. If neither
BGP nor MBGP is in operation, a static RPF peer should be configured.
30.2 MSDP Configuration
1) Basic configuration tasks of MSDP include:
Enable MSDP
Configure MSDP peers
2) Advanced configuration tasks of MSDP include:
Configure static RPF peers
Configure Originating RP
Configure SA caching state
Configure the maximum number of SA caching
Request the source information of MSDP peers
Control the source information created
Control the source information forwarded
Control the received source information
Configure MSDP full connection group
Configure the MSDP connection retry period
Disable MSDP peers
Clear MSDP connection, statistics and SA cache

30.2.1 Enabling MSDP

To configure MSDP, you must enable MSDP first.
Please perform the following configurations in system view.
Table 30-1 Enabling MSDP
Enable MSDP and enter MSDP view
Clear all MSDP configurations
Operation
30-4
Chapter 30 MSDP Configuration
Command
msdp
undo msdp