3Com 8800 Configuration Manual page 384

3Com Switch 8800 Configuration Guide
1) Define the time range.
Define the time range from 8:00 to 18:00.
[SW8800] time-range 3Com 8:00 to 18:00 daily
2) Define a user-defined flow template
[SW8800] flow-template user-defined slot 3 ethernet-protocol smac 0-0-0 dmac
0-0-0
3) Define the traffic with source MAC 00e0-fc01-0101 and destination MAC
00e0-fc01-0303.
Create a name-based L2 ACL "traffic-of-link" and enter it.
[SW8800] acl name traffic-of-link link
Define ACL rule for the traffic with source MAC 00e0-fc01-0101 and destination MAC
00e0-fc01-0303.
[SW8800-acl-link-traffic-of-link] rule 1 deny ingress 00e0-fc01-0101 0-0-0
egress 00e0-fc01-0303 0-0-0 time-range 3Com
[SW8800-acl-link-traffic-of-link] quit
4) Apply the user-defined flow template to the port and activate the ACL.
Apply the user-defined flow template to Ethernet2/1/1.
[SW8800] interface Ethernet2/1/1
[SW8800-Ethernet2/1/1] flow-template user-defined
Activate the ACL "traffic-of-link".
[SW8800-Ethernet2/1/1] packet-filter inbound link-group traffic-of-link
32-14
Chapter 32 ACL Configuration