3Com 8800 Configuration Manual page 43

3Com Switch 8800 Configuration Guide
Partial help
You can get the help information through these online help commands, which are
described as follows.
1) Input "?" in any view to get all the commands in it and corresponding descriptions.
<SW8800> ?
User view commands:
language-mode
ping
quit
super
telnet
tracert
2) Input a command with a "?" separated by a space. If this position is for keywords,
all the keywords and the corresponding brief descriptions will be listed.
<SW8800> language-mode ?
chinese
english
3) Input a command with a "?" separated by a space. If this position is for parameters,
all the parameters and their brief descriptions will be listed.
[SW8800] garp timer leaveall ?
INTEGER<65-32765>
[SW8800] garp timer leaveall 300 ?
<cr>
<cr> indicates no parameter in this position. The next command line repeats the
command, you can press <Enter> to execute it directly.
4) Input a character string with a "?", then all the commands with this character string
as their initials will be listed.
<SW8800> p?
ping pwd
5) Input a command with a character string and "?", then all the key words with this
character string as their initials in the command will be listed.
<SW8800> display ver?
version
6) Input the first letters of a keyword of a command and press <Tab> key. If no other
keywords are headed by this letters, then this unique keyword will be displayed
automatically.
7) To switch to the Chinese display for the above information, perform the
language-mode command.
Specify the language environment
Ping function
Exit from current command view
Privilege current user a specified priority level
Establish one TELNET connection
Trace route function
Chinese environment
English environment
Value of timer in centiseconds
(LeaveAllTime > (LeaveTime [On all ports]))
Time must be multiple of 5 centiseconds
Chapter 3 Command Line Interface
3-8