Configuring Custom Dhcp Options - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
Table 13-24 Configure a NetBIOS node type for multiple VLAN interfaces
Configure NetBIOS node types for
DHCP clients of multiple VLAN interface
DHCP address pools
Remove
configurations
interface DHCP address pools
By default, the DHCP clients of global and VLAN interface address pools are all of
h-node type.

13.3.9 Configuring Custom DHCP Options

With the evolvement of DHCP, new options come forth continuously. To utilize these
options, you can manually add them to the property list of a DHCP server.
I. Configuring custom DHCP options for a global DHCP address pool
Perform the following configuration in DHCP address pool view.
Table 13-25 Configure a custom DHCP options for a global DHCP address pool
Configure a custom DHCP option for a
global DHCP address pool
Remove a custom DHCP option configured
for a global DHCP address pool
II. Configuring custom DHCP options for current VLAN interface
Perform the following configuration in VLAN interface view.
Table 13-26 Configure custom DHCP options for current VLAN interface
Configure a custom DHCP option for
DHCP address pool of the current VLAN
interface
Remove
configured for the DHCP address pool of
the current VLAN interface
Operation
NetBIOS node
of multiple
Operation
Operation
a custom DHCP
13-16
Chapter 13 DHCP Configuration
dhcp server netbios-type { b-node |
h-node | m-node | p-node } { interface
vlan-interface
vlan-interface vlan_id ] | all }
type undo dhcp
VLAN { interface vlan-interface vlan_id [ to
vlan-interface vlan_id ] | all }
option code { ascii ascii-string | hex
hex-string | ip-address ip-address
[ ip-address ] }
undo option code
dhcp server option code { ascii
ascii-string | hex hex-string | ip-address
ip-address [ ip-address ] }
option
undo dhcp server option code
Command
vlan_id [
server netbios-type
Command
Command
to