3Com 8800 Configuration Manual page 362

3Com Switch 8800 Configuration Guide
Table 31-9 Configuring IP-ACL-based route filtering policy for a peer (group)
Configure filteriing policy for
incoming packets
Remove
cnfiguration
Configure
outgoing packets
Remove
cnfiguration
By default, a peer (group) does not perform route filtering based on the IP ACL.
IX. Configuring AS-path-list-based route filtering policy for a peer (group)
Please perform the following configurations in IPV4 multicast sub-address family view.
Table 31-10 Configuring the AS-path-list-based route filtering policy for a peer (group)
Configure filteriing policy
for incoming packets
Remove incoming policy
cnfiguration
Configure routing policy
for outgoing packets
Remove outgoing policy
cnfiguration
By default, a peer (group) does not perform route filtering based on the AS path list.
X. Configuring prefix-list-based route filtering policy for a peer (group)
Please perform the following configurations in IPV4 multicast sub-address family view.
Table 31-11 Configuring prefix-list-based route filtering policy for a peer (group)
Configure filteriing policy for
incoming packets
Remove
cnfiguration
Configure routing policy for
outgoing packets
Operation
incoming policy
routing policy
outgoing policy
Operation
peer { group-name | peer-address } as-path-acl
acl-number import
undo peer { group-name | peer-address } as-path-acl
acl-number import
peer group-name as-path-acl acl-number export
undo peer group-name as-path-acl acl-number
export
Operation
incoming policy
Chapter 31 MBGP Multicast Extension Configuration
peer { group-name
filter-policy acl-number import
undo peer { group-name | peer-address }
filter-policy acl-number import
for peer group-name filter-policy acl-number
export
undo peer
acl-number export
Command
Command
peer { group-name | peer-address } ip-prefix
prefixname import
undo peer { group-name | peer-address } ip-prefix
prefixname import
peer group-name ip-prefix prefixname export
31-8
Command
| peer-address
group-name filter-policy
}