Configuring Netbios Server Address For Dhcp Clients - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
Table 13-17 Configure DNS server address for current VLAN interface
Configure
addresses for the DHCP address pool of the
current VLAN interface
Remove one or all DNS server addresses
configured for the DHCP address pool of the
current VLAN interface
III. Configuring DNS server address for multiple VLAN interfaces
Perform the following configuration in system view.
Table 13-18 Configure DNS server address for multiple VLAN interfaces
Configure one or more DNS server
addresses for the DHCP address pools
of multiple VLAN interfaces
Remove
addresses configured for the DHCP
address
interfaces
By default, no DNS server address is configured for global and VLAN interface address
pools.
If you execute the dhcp server dns-list command multiple times, the newly configured
IP addresses overwrite the existing ones.

13.3.7 Configuring NetBIOS Server Address for DHCP Clients

For clients running a Windows operating system and communicating through the
NetBIOS protocol, translations between host name and IP address are carried out by
Windows Internet Naming Service (WINS) servers. So you need to perform
configurations concerning WINS for these clients. At present, you can configure up to
eight NetBIOS server addresses for a DHCP address pool.
I. Configuring NetBIOS server address for a global DHCP address pool
Perform the following configuration in DHCP address pool view.
Operation
one or more DNS
Operation
one or all DNS
pools of multiple
13-13
Chapter 13 DHCP Configuration
server
dhcp server dns-list ip-address
[ ip-address ]
undo
{ ip-address | all }
dhcp server
[ ip-address ] { interface vlan-interface
vlan_id [ to vlan-interface vlan_id ] |
all }
server
undo dhcp server dns-list { ip-address
| all } { interface vlan-interface vlan_id
VLAN
[ to vlan-interface vlan_id ] | all }
Command
dhcp server dns-list
Command
dns-list ip-address