3Com Switch 8800 Configuration Guide
Table 46-46 Display and debug info-center
Display the content of information
channel
Display configuration of system log
and memory buffer
Display the attribute of logbuffer and
the information recorded in logbuffer
Display the summary information
recorded in logbuffer
Display the attribute of trapbuffer and
the information recorded in trapbuffer
Clear information in memory buffer
Clear information in trap buffer
46.5.10 Configuration Examples of Sending Log to the Unix Loghost
I. Network requirements
The network requirements are as follows:
Sending the log information of the switch to Unix loghost
The IP address of the loghost is 202.38.1.10
The information with the severity level above informational will be sent to the
loghost
The output language is English
The modules that allowed to output information are ARP and IP
II. Network diagram
Switch
Switch
Switch
Figure 46-2 Network diagram
Operation
Network
Network
46-28
Chapter 46 System Maintenance and Debugging
Command
display channel [ channel-number |
channel-name ]
display info-center
display logbuffer [ summary ] [ level
[ levelnum | emergencies | alerts | critical
| debugging | errors | informational |
notifications | warnings ] ] [ | [ begin |
exclude | include text ] [ size sizenum ]
display
logbuffer summary [ level
severity ]
display trapbuffer [ summary ] [ level
[ levelnum | emergencies | alerts | critical
| debugging | errors | informational |
notifications | warnings ] ] [ size
sizenum]
reset logbuffer
reset trapbuffer
PC
PC