3Com 8800 Configuration Manual page 374

3Com Switch 8800 Configuration Guide
Table 32-3 ACL configuration tasks
No.
Enter the system
1
view
Configure
2
time range
Define
3
template
Enter the ACL
4
view
5 Define sub-rules
Exit ACL view
6
Enter
port view
Apply a defined
flow template in
7
the Ethernet port
view
8 Activate the ACL
32.2.1 Configuring Time Range
You may set such items in time range configuration: The defined time range includes
absolute time range and period time range. The absolute time range is in the form of
hh:mm YYYY/MM/DD; the period time range is in the format of hh:mm, day.
Perform the following configurations in system view.
Table 32-4 Configure time range
Operation
Create time range
Delete time range
Item
<SW8800> system-view
the
[SW8800] time-range
a flow [SW8800]
user-defined slot slotid template-info
[SW8800] acl
[SW8800-acl-adv-3000] rule
[SW8800-acl-adv-3000] quit
Ethernet
[SW8800] interface Ethernet 5/1/1
[SW8800-Ethernet5/1/1]
flow-template user-defined
[SW8800-Ethernet5/1/1]
packet-filter inbound
time-range
days-of-the-week [ from start-time start-date ] [ to end-time
end-date ] | from start-time start-date [ to end-time
end-date ] | to end-time end-date }
undo time-range time-name [ start-time to end-time
days-of-the-week [ from start-time start-date ] [ to end-time
end-date ] | from start-time start-date [ to end-time
end-date ] | to end-time end-date ]
32-4
Chapter 32 ACL Configuration
Command
flow-template
Command
time-name { start-time
Description
—
Optional
Optional
Required
Required
—
Optional. You
can perform
this operation
only when a
flow template
has been
previously
defined.
Required
to end-time