3Com 8800 Configuration Manual page 28

3Com Switch 8800 Configuration Guide
Features
IP routing
DHCP Relay
Link
aggregation
Mirror
Quality
Service (QoS)
Security
features
MPLS
Management
and
Maintenance
Loading
updating
Supports static routing
Supports Routing Information Protocol (RIP) v1/v2
Supports Open Shortest Path First (OSPF)
Supports Border Gateway Protocol (BGP)
Supports Intermediate
intra-domain routing information exchange protocol (IS-IS)
Supports IP routing policy
Supports Dynamic Host Configuration Protocol (DHCP) Relay
Supports link aggregation, including two kinds of link aggregation
LACPs (link aggregation control protocols): static aggregation
and dynamic aggregation.
Supports the port-based mirror
Supports flow mirroring of copying messages to CPU
Supports traffic classification
Supports bandwidth control
Supports congestion control
of
Supports traffic shaping and traffic supervision
Supports queues of different priority on the port
Queue scheduling: supports Strict Priority Queuing (SP),
Weighted Round Robin (WRR), and SP+WRR
Supports Multi-level user management and password protect
Supports 802.1X authentication
Supports Packet filtering
Supports Multiprotocol Label Switching (MPLS) basic function
Supports MPLS L3 VPN
Supports Command Line Interface configuration
Supports local configuration via Console port and AUX port
Supports Local and remote configuration through Telnet on
Ethernet port
Supports Remote configuration through dialing with modem via
the AUX port.
Supports SNMP management (Supports Quidview NMS and
RMON MIB Group 1, 2, 3 and 9)
Supports system log
Supports level alarms
Supports output of the debugging information
Supports PING and Tracert
Supports the remote maintenance via Telnet and Modem
Supports to load and upgrade software via XModem protocol
and
Supports to load and upgrade software via File Transfer Protocol
(FTP) and Trivial File Transfer Protocol (TFTP)
Implementation
System-to-Intermediate
1-2
Chapter 1 Product Overview
System