3Com Switch 8800 Configuration Guide
Table 43-11 lists the configuration of the switching as FTP server.
Table 43-11 Configuration of the switch as FTP server
Device
Switch
PC
Caution:
The prerequisite for normal FTP function is that the switch and PC are reachable.
43.3.2 Enabling/Disabling FTP Server
You can use the following commands to enable/disable the FTP server on the switch.
Perform the following configuration in system view.
Table 43-12 Enable/disable FTP Server
Enable the FTP server
Disable the FTP server
FTP server supports multiple users to access at the same time. A remote FTP client
sends request to the FTP server. Then, the FTP server will carry out the corresponding
operation and return the result to the client.
By default, FTP server is disabled.
43.3.3 Configuring the FTP Server Authentication and Authorization
The authorization information of FTP server includes the path to the desired directory
for FTP users. The FTP server service is available only for the authenticated and
Configuration
Start FTP server.
Configure authentication
and
authorization
for
FTP server.
Configure
running
parameters
for
FTP
server.
Log into the switch from
FTP client.
Operation
Chapter 43 File System Management
Default
You can view the configuration
FTP server
information of FTP server with
is disabled.
the
command.
Configure username, password
—
and authorized directory for
FTP users.
Configure timeout time value
—
for FTP server.
—
—
ftp server enable
undo ftp server
43-8
Description
display
ftp-server
Command