Enabling/Disabling Stopping Accounting Request Buffer; Setting The Maximum Retransmitting Times Of Stopping Accounting Request - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide

40.3.9 Enabling/Disabling Stopping Accounting Request Buffer

Because the stopping accounting request concerns account balance and will affect the
amount of charge, which is very important for both the subscribers and the ISP, NAS
shall make its best effort to send the request to RADIUS accounting server.
Accordingly, if the request from the Switch 8800 to RADIUS accounting server has not
been responded, switch shall save it in the local buffer and retransmit it until the server
responds or discards the messages after transmitting for specified times. You can use
the following command to set whether or not to save the stopping accounting requests.
Perform the following configuration in RADIUS scheme view.
Table 40-19 Enable/Disable stopping accounting request buffer
Enable stopping accounting request buffer
Disable
buffer
By default, the stopping accounting request will be saved in the buffer.
40.3.10 Setting the Maximum Retransmitting Times of Stopping Accounting
Request
Because the stopping accounting request concerns account balance and will affect the
amount of charge, which is very important for both the subscribers and the ISP, NAS
shall make its best effort to send the message to RADIUS accounting server.
Accordingly, if the request from the Switch 8800 to RADIUS accounting server has not
been responded, switch shall save it in the local buffer and retransmit it until the server
responds or discards the messages after transmitting for specified times. Use the
following command to set the maximum retransmission times.
Perform the following configuration in RADIUS scheme view.
Table 40-20 Set the maximum retransmitting times of stopping accounting request
Set the maximum retransmitting times of
stopping accounting request
Restore the maximum retransmitting times of
stopping accounting request to the default value
By default, the stopping accounting request can be retransmitted for up to 500 times.
Operation
stopping accounting
Operation
Chapter 40 AAA and RADIUS/TACACS+ Protocol Con
stop-accounting-buffer enable
request
undo
enable
retry
retry-times
undo retry stop-accounting
40-19
figuration
Command
stop-accounting-buffer
Command
stop-accounting