Ssh Client Configuration Example - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide

50.1.6 SSH Client Configuration Example

I. Network requirements
As shown in Figure 50-4:
Switch A is used as an SSH client.
Switch B is used as the SSH server, and the IP address is 10.165.87.136.
II. Network diagram
Switch B Switch B
SSH server
IP address : IP address
PC PC
Figure 50-4 Network diagram for SSH client
III. Configuration procedure
Configure the client to perform the first-time authentication of the server.
Employ password authentication mode, and start using the default encryption
algorithm.
Log onto the SSH2 server with IP address 10.165.87.136.
[SW8800] ssh2 10.165.87.136
Please input the username:sshuser1
Trying 10.165.87.136
Press CTRL+K to abort
Connected to 10.165.87.136 ...
Enter password:
*********************************************************
*
* Without the owner's prior written consent,
*no decompiling or reverse-engineering shall be allowed.*
*********************************************************
<SW8800>
Configure the client to authenticate the server for the first time.
<SW8800> system-view
10.165.87.136
Switch A Switch A
SSH client
All rights reserved (1997-2004)
50-16
Chapter 50 SSH Terminal Service
*
*