3Com 8800 Configuration Manual page 167

3Com Switch 8800 Configuration Guide
II. Network diagram
Ethernet
Interface address:
110.11.2.3/24
SwitchC
Network address:
117.102.0.0/16
Figure 18-1 Network diagram for RIP configuration
III. Configuration procedure
Note:
The following configuration only shows the operations related to RIP. Before
performing the following configuration, make sure the Ethernet link layer can work
normally.
1) Configure Switch A
Configure RIP
[Switch A] rip
[Switch A-rip] network 110.11.2.0
[Switch A-rip] network 155.10.1.0
2) Configure Switch B
Configure RIP
[Switch B] rip
[Switch B-rip] network 196.38.165.0
[Switch B-rip] network 110.11.2.0
3) Configure Switch C
Configure RIP
[Switch C] rip
[Switch C-rip] network 117.102.0.0
Interface address:
155.10.1.1/24
SwitchA
Interface address:
110.11.2.1/24
Interface address:
Interface address:
117.102.0.1/16
196.38.165.1/24
18-13
Chapter 18 RIP Configuration
Network address:
155.10.1.0/24
Interface address:
110.11.2.2/24
SwitchB
Network address:
196.38.165.0/24