Configuring A Community Attribute List; Importing Routing Information Discovered By Other Routing Protocols - 3Com 8800 Configuration Manual

3com 8800: install guide
Hide thumbs Also See for 8800:
Table of Contents

Advertisement

3Com Switch 8800 Configuration Guide

22.2.4 Configuring a Community Attribute List

In BGP, community attribute is optional and transitive. Some community attributes
known globally are called standard community attributes. Some community attributes
are for special purpose. You can also define expanded community attribute.
A route can have one more community attributes. The speakers of multiple community
attributes of a route can act according to one, several or all attributes. A router can
select community attribute modification before transmitting routes to other peers.
Community lists, which identify community information, can be divided into
basic-community-lists and advanced-community-lists. Basic-community-lists range
from 1 to 99, while advanced-community-lists range from 100 to 199.
Perform the following configuration in system view.
Table 22-6 Configure a community attribute list
Configure a basic community-list
Configure
community-list
Cancel a community-list
By default, a BGP community attribute list is not configured.
22.2.5 Importing Routing Information Discovered by Other Routing
Protocols
A routing protocol can import the routes discovered by other routing protocols to enrich
its route information. The route-policy can be used for route information filtering to
implement the purposeful redistribution. If the destination routing protocol importing the
routes cannot directly reference the route costs of the source routing protocol, you
should satisfy the requirement of the protocol by specifying a route cost for the
imported route.
Perform the following configuration in routing protocol view.
Table 22-7 Configure to import the routes of other protocols
Set to import routes of other protocols
Operation
an
advanced
Operation
22-8
Chapter 22 IP Routing Policy Configuration
Command
ip community-list basic-comm-list-number
{ permit | deny } [ aa:nn | internet |
no-export-subconfed | no-advertise |
no-export ]*
ip community-list adv-comm-list-number
{ permit | deny } comm-regular-expression
undo
ip
{
basic-comm-list-number
adv-comm-list-number }
Command
import-route protocol [ med med | cost
cost ] [ tag value ] [ type 1 | 2 ]
[ route-policy route-policy-name ]
community-list
|

Advertisement

Table of Contents
loading

Table of Contents