Shutting Msdp Peers Down; Clearing Msdp Connections, Statistics And Sa Caching Configuration - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
Table 30-14 Configuring the MSDP connection retry period
Configuring the MSDP connection retry period
Restore the default value of MSDP connection retry interval
By default, MSDP connection is retried at the interval of 30 seconds.

30.2.13 Shutting MSDP Peers Down

The session between MSDP peers can be cut off and re-activated as needed.
If a session between MSDP peers is cut off, the TCP connection will terminate with no
retry effort, but the configuration information will be reserved.
Please perform the following configurations in MSDP view.
Table 30-15 Shutting MSDP peers down
Shut a specified MSDP peer down
Turn the MSDP peer up
By default, MSDP peer is enabled.
30.2.14 Clearing MSDP Connections, Statistics and SA Caching
Configuration
Perform the following configurations in user view.
Table 30-16 Clearing MSDP connections, statistics and SA caching configuration
Clear a specified TCP connection and
reset the
information
Clear MSDP peer statistics
Clear cached SA entries of MSDP
Operation
Operation
Operation
counters of all MSDP
30-11
Chapter 30 MSDP Configuration
timer retry seconds
undo timer retry
Command
shutdown peer-address
undo shutdown peer-address
Command
reset msdp peer peer-address
reset msdp statistics [ peer-address ]
reset msdp sa-cache [ group-address ]
Command