3Com 8800 Configuration Manual page 752

3Com Switch 8800 Configuration Guide
II. Network diagram
PC PC
SSH client
Figure 50-3 Network diagram for SSH server
III. Configuration procedure
1) Generate the RSA key.
[SW8800] rsa local-key-pair create
Note:
If the configuration for generating the local key has already been completed, skip this
step.
2) Set the user login authentication mode.
The following shows the configuration methods for both password authentication and
RSA public key authentication.
Password authentication.
Create the local user client001, and set the authentication mode of the user interface to
AAA.
[SW8800] user-interface vty 0 4
[SW8800-ui-vty0-4] authentication-mode scheme
Specify the login protocol for user client001 as SSH.
[SW8800-ui-vty0-4] protocol inbound ssh
[SW8800] local-user client001
[SW8800-luser-client001] password simple 3Com
[SW8800] ssh user client001 authentication-type password
Chapter 50 SSH Terminal Service
Switch Switch
SSH server
50-14