3Com 8800 Configuration Manual page 94

3Com Switch 8800 Configuration Guide Chapter 9 GARP/GVRP Configuration
III. Configuration procedure
Configure Switch A:
Enable GVRP globally.
[SW8800] gvrp
Set Ethernet3/1/1 as a Trunk port and allows all the VLANs to pass through.
[SW8800] interface ethernet3/1/1
[SW8800-Ethernet3/1/1] port link-type trunk
[SW8800-Ethernet3/1/1] port trunk permit vlan all
Enable GVRP on the Trunk port.
[SW8800-Ethernet3/1/1] gvrp
Configure Switch B:
Enable GVRP globally.
[SW8800] gvrp
Set Ethernet4/1/1 as a Trunk port and allows all the VLANs to pass through.
[SW8800] interface ethernet4/1/1
[SW8800-Ethernet4/1/1] port link-type trunk
[SW8800-Ethernet4/1/1] port trunk permit vlan all
Enable GVRP on the Trunk port.
[SW8800-Ethernet4/1/1] gvrp
9-7