To do...
Enter system view
Enter Ethernet port view
Enable flow control on the
Ethernet port
Configuring Access Port Attribute
Follow these steps to configure access port attribute:
To do...
Enter system view
Enter Ethernet port view
Configure the link type for the
port as access
Add the current access port into
the specified VLAN
Configuring Hybrid Port Attribute
Follow these steps to configure hybrid port attribute:
To do...
Enter system view
Enter Ethernet port view
Set the link type for the port as
hybrid
Set the default VLAN ID for the
hybrid port
Add the current hybrid port into
the specified VLAN
Configuring Trunk Port Attribute
Follow these steps to configure trunk port attribute:
Use the command...
system-view
interface interface-type
interface-number
flow-control
Use the command...
system-view
interface interface-type
interface-number
port link-type access
port access vlan vlan-id
Use the command...
system-view
interface interface-type
interface-number
port link-type hybrid
port hybrid pvid vlan vlan-id
port hybrid vlan vlan-id-list
{ tagged | untagged }
1-6
Remarks
—
—
Required
By default, flow control is not
enabled on a port.
Remarks
—
—
By default, the link type for the
port is access.
Optional
Remarks
—
—
Required
Optional
By default, the VLAN of a
hybrid port is VLAN 1.
Optional
For a hybrid port, you can
configure to tag the packets of
specific VLANs, based on
which the packets of those
VLANs can be processed in
differently ways.