Removing And Installing Sealing Flange And Flywheel - Volkswagen CJDA Workshop Manual

3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
11 - Ancillary bracket
q For alternator, air conditioner compressor, if fitted
q Removing and installing, adhere to tightening sequence
12 - Bolt
q Observe different prescribed torques and tightening sequence
13 - 25 Nm
14 - Sump
q Clean sealing surface before fitting.
q Install with silicone sealant D176404 A2
q Removing and installing
15 - 15 Nm
2 Removing and installing sealing
flange and flywheel
Note
◆ The repair work described in this chapter must be carried out
in a Volkswagen dealership only. Go to a Volkswagen deal-
ership.
◆ If these instructions are not adhered to and damage results,
Volkswagen is exempt from any liability and warranty claims.
WARNING
Adhere to the general safety regulations and the notes on
repair work on the engine!
Note
Before carrying out repair work, secure engine on engine and
gearbox support -VAS 6095/1- using universal mounting
-VAS 6095-.
Assembly overview - sealing flange, belt pulley end
⇒ P age
159.
Renewing crankshaft oil seal, belt pulley end
Removing and installing crankshaft sealing flange, pulley end
⇒ P age
164.
Assembly overview - sealing flange and flywheel
Renewing crankshaft sealing flange, flywheel end
Removing and installing engine speed sender -G28-
⇒ P age
178.
158 Repair Group 13 - Crankshaft group
⇒ P age 244
⇒ P age 1
⇒ P age
161.
⇒ P age
⇒ P age
⇒ P age 144
⇒ P age 144
167.
169.