Volkswagen CJDA Workshop Manual page 446

3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
10 - Bracket
q Or no. 14 installed
11 - 25 Nm
12 - 25 Nm
13 - 25 Nm
14 - Bracket
q Or no. 9 installed
15 - Bracket
q Or no. 9 installed
16 - Clamp ahead of oxidising catalytic converter, 7 Nm
q Make sure it is firmly seated
q Note installation position
17 - Seal
q Renew
q Note installation position
18 - Oxidising catalytic converter
1.2 Renewing diesel particulate filter, en-
gine codes CPYA, CPYB, CPYC, CPYD,
CPYE
Special tools and workshop equipment required
◆ Socket AF 22 mm for lambda probe -T 10491-
◆ Torque wrench -V.A.G 1331-
Note
◆ If the diesel particulate filter has to be renewed before
5400 operating hours have been completed due to exces-
sive ash deposit mass or soot loading, perform the following
work beforehand:
◆ Check charge air system for leaks.
◆ Check exhaust gas recirculation system.
Removing
430 Repair Group 26 - Exhaust system