Pressing In Sealing Flange With Sender Wheel; A - Assembling Seal With Sender Wheel On Assembly Tool -T10134 - Volkswagen CJDA Workshop Manual

3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
2.5.2 Pressing in sealing flange with sender
wheel
Note
◆ The sealing flange with a PTFE seal is equipped with a seal-
ing lip support ring. This support ring serves as a fitting
sleeve and must not be removed prior to installation.
◆ Sealing flange and sender wheel must not be separated or
turned after removal from packaging.
◆ The sender wheel is held in its installation position on the as-
sembly device -T10134- by a locating pin.
◆ Sealing flange and oil seal form one unit and must only be
renewed together with the sender wheel.
◆ The assembly device -T10134- is held in its position relative
to the crankshaft by a guide pin inserted into a hole in the
crankshaft.
Assembly tool -T10134-
A - Clamping surface
B - Hexagon nut
C - Assembly housing
D - Locating pin
E - Hexagon socket head bolt
F - Guide pin for diesel engines (black knob)
G - Guide pin for petrol engines (red knob)
2.5.3 A - Assembling seal with sender wheel on
assembly tool -T10134-
– Screw in hexagon nut -B- to just before clamping surface -A-
of threaded spindle.
172
Repair Group 13 - Crankshaft group