Volkswagen CJDA Workshop Manual page 492

3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
2.3.1 Removing
Note
◆ The procedure described below provides only general in-
structions for removing and installing the alternator, since
due to the various use cases it is not possible to specify a
common procedure.
◆ Depending on how the engine is installed, the location where
the repair measure is required may be difficult to access.
Remove any required components to ensure proper working
conditions. If available, adhere to the descriptions of work
from the respective manufacturer.
– Note safety precautions before beginning work
– Observe rules for cleanliness
– Remove poly V-belt
– Disconnect connector of DF wire -1-, and, if fitted, pull off
protective cap -2-.
– Unscrew securing nut -1-, and remove "B1+ wire" located
below it from alternator connection.
– Unscrew securing nut -3-, and remove line retainer -2- from
alternator.
– Unscrew securing bolts of alternator -arrows-.
– Remove alternator.
476 Repair Group 27 - Starter, current supply, CCS
⇒ P age
354.
⇒ P age
138.
⇒ P age
354.