2.3.2 Installing
Install in reverse order. In the process, note the following:
– To prevent any damage to the cylinder block and ancillary
bracket, always adhere to the tightening sequence and
specified torque for the ancillary bracket
– Drive threaded sleeves -A- about 4 mm in
-direction of arrow- out of alternator housing.
Caution
Do not damage threaded sleeves while driving them out.
– Secure line retainer -arrow- in 3 o'clock position on back of
alternator.
– Tighten threaded connections to specified torque given in
assembly overview
– With ignition switched off, connect battery.
⇒ P age
– Install poly V-belt
2.4
Removing and installing voltage regula-
tor -C1-
Removing and installing voltage regulator -C1-:
◆ Bosch
⇒ P age
478,
◆ Valeo
⇒ P age
479.
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ P age
⇒ P age
472.
138.
Industriemotoren - Industrial Engines 2009 ▶
144.
3
477
2 Alternator -C-