Volkswagen CJDA Workshop Manual page 497

2.5.1 Removing and installing poly V-belt pulley
without freewheel
Special tools and workshop equipment required
◆ Torque wrench (40...200 Nm) -V.A.G 1332-
◆ Socket 24 mm -3310-
⇒ P age
Removing 481.
⇒ P age
Installing 481.
Removing
– Remove alternator -C-
– Clamp alternator in a vice at mounting points.
– Use socket -VAS 3310- to unscrew poly V-belt pulley secur-
ing nut from alternator shaft.
Installing
Installation is carried out in the reverse order. When installing,
note the following:
– Tighten securing nut of poly V-belt pulley on alternator shaft
to 65 Nm.
– Install alternator -C-
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ P age
475.
⇒ P age
475.
Industriemotoren - Industrial Engines 2009 ▶
3
2 Alternator -C- 481