Volkswagen CJDA Workshop Manual page 231

– Lock camshaft hub with locking pin -3359-. To do this, slide
locking pin through outer free elongated hole into hole in cyl-
inder head.
– Loosen bolts which had been tightened only hand-tight.
Note
If necessary, turn hub of high-pressure pump at bolt heads with
screwdriver until it can be secured in position.
Positioning hub of high-pressure pump
– Lock hub of high-pressure pump with locking pin -3359-. To
do this, slide locking pin into adjustment hole outside toothed
belt pulley.
– Turn camshaft pulley and toothed belt pulley of high-pres-
sure pump in their elongated holes clockwise to stop.
– Fit toothed belt to crankshaft pulley, tensioning roller, cam-
shaft pulley, toothed belt pulley of coolant pump and toothed
belt pulley of high-pressure pump.
– Finally, fit toothed belt to idler pulley.
– Loosen tensioning roller securing nut and pull out locking
tool -T10265-.
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
Industriemotoren - Industrial Engines 2009 ▶
3
1 Cylinder head 215