Volkswagen CJDA Workshop Manual page 269

17 - Oil level and oil temperature sender -G266-
q Black connector, 3-pin.
q Removing and installing
18 - Seal
q Renew
19 - Oil pump
q With 12 bar pressure relief valve
q Before installing, check that both dowel sleeves for centring oil pump on cylinder block are fitted.
q Check oil pump for free movement.
q Replace if tight/binding.
20 - Chain sprocket for oil pump
21 - Retainer
q For oil level and oil temperature sender -G266- wiring harness, if fitted
1
22 - 20 Nm + / turn (90°) further
4
23 - Chain
24 - 25 Nm
q Insert without sealant.
25 - Oil spray jet
q For piston cooling
Oil spray jet and pressure relief valve
Note
When renewing the oil spray jet, ensure correct allocation to
piston.
Removing and installing oil level and oil temperature send-
er -G266-, if fitted
1 - Bolt, 10 Nm, self-locking, renew
2 - Seal; renew
3 - Electrical connector
4 - Oil level and oil temperature sender -G266-
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ F ig. on page 253
⇒ F ig. on page
253.
Industriemotoren - Industrial Engines 2009 ▶
2 Parts of lubrication system
3
253