Volkswagen CJDA Workshop Manual page 158

3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
– Swing tensioning element in -direction of arrow- to remove
tension from poly V-belt.
– Align holes -arrows-, and lock tensioning element in position
using locking pin -T10060 A-.
– Remove poly V-belt.
Installing
– Installation is carried out in the reverse order. When instal-
ling, note the following:
Note
◆ Before installing poly V-belt, make sure that all ancillaries
(alternator, air conditioner compressor) are secured firmly.
◆ When installing poly V-belt, check direction of belt rotation
and proper seating of belt in pulleys.
– Fit poly V-belt on pulleys.
1 - Crankshaft
2 - Tensioning element
3 - Alternator
4 - Air conditioner compressor
After completing repairs always:
– Make sure that the poly V-belt is routed as shown in illustra-
tion.
– Start engine and check belt running.
Example without air conditioner compressor
Special tools and workshop equipment required
◆ Poly V-belt repair kit with assembly tool ⇒ Electronic Parts
Catalogue
142
Repair Group 13 - Crankshaft group