Volkswagen CJDA Workshop Manual page 271

1 - 15 Nm
2 - Sealing flange
q With seal.
q Must sit on dowel
sleeves
q Removing and in-
stalling.
q Insert with silicone
sealant
D 176 404 A2.
q Do not additionally
oil or grease the oil
seal sealing lip.
q Before installing, re-
move oil residue
from crankshaft
journal using a
clean cloth.
3 - Toothed belt for oil
pump
q Check for damage
and wear
q Renew as needed
Note
◆ Belts which have
been in use longer
can sag.
◆ This is not a fault
and does not neces-
sarily mean belt
needs replacing.
4 - 10 Nm
5 - Oil dipstick
q The oil level must not be above the max. mark!
q Markings
6 - Guide tube
q Renew O-ring.
7 - Clip
8 - Dowel sleeves
q Renew
9 - O-ring
q Renew
10 - 10 Nm
11 - Oil pump with pressed-on toothed belt pulley
q With 12 bar pressure relief valve
q Before installing, check that both dowel sleeves for centring oil pump on cylinder block are fitted.
If toothed belt or oil pump have to be removed:
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
Industriemotoren - Industrial Engines 2009 ▶
2 Parts of lubrication system
3
255