Volkswagen CJDA Workshop Manual page 339

13 - Retainer
q For oil supply line.
14 - Heat shield
15 - Support
q Between turbocharger and cylinder block.
16 - Seal
q Renew
17 - Banjo bolt, 60 Nm
q Renew
18 - Oil return pipe
19 - 15 Nm
20 - Pulsation damper
21 - 10 Nm
Installation position of exhaust gas temperature sender
with angled cable guide
Note
When installing the exhaust gas temperature sender with an-
gled cable guide, it is absolutely necessary to keep to dimen-
sion -a- of 3...5 mm when tightening the turbocharger support.
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
Industriemotoren - Industrial Engines 2009 ▶
1 Charge air system with turbocharger
3
323